|
Click
on the picture
to
Order Information
|
Living Water
EcoTech -Part of The Formula For Success of Springhouse.
EcoTech
is a four step process that combines 1 micron Solid Block
Carbon Filtration with Ozone and Ultraviolet light to provide
the most complete point of use purification system available
on the market today. Costing less the 5 cents per gallon with no water waste it
is a very economical point of use solution to your water concerns.
Ozone
Treatment (Step 1 & 2 of Living Water System)
Ozone,
a 3-atom form of OXYGEN, is a normal element in the earth's
atmosphere. Its presence, often detected after a lightning
storm, is by its sweet, fresh odor. Ozone will attach and
destroy, by oxidation, any offending molecule that gets in
its path. It rapidly decomposes leaving no traces and does
not produce any toxic halogenated compounds.
Ozone
is second only to fluorine as a powerful oxidant and is the
most powerful water sanitizer readily available. Ozone inactivates
bacteria and virus much faster than chlorine. The bacterial
kill rate of Ozone is 3,125 times faster than chlorine and
it is a 50 percent stronger oxidizer than chlorine.
It
is unsurpassed for control of common bacteria such as E. coli
and fecal coliform as well as deactivation of virus and cysts.
And unlike chlorine, Ozone does not produce Trihalomethanes
and is non-carcinogenic. Chlorine can be blamed for hundreds
of thousands of deaths worldwide, with no evidence of any
deaths to humans of over exposure to Ozone.
Ozone
oxidizes many inorganic and organic impurities as well as
inactivates bacteria, virus and cysts. It removes iron, manganese,
sulfides and nitrites forms into insoluble forms, which can
then be removed by filtration. Good filtration is important
in removal of high levels of oxidized minerals. Chlorine can
take hours to penetrate the cell wall of bacteria or virus,
while Ozone oxidations occur within seconds. Ozone also functions
as a flocculating or clarifying agent to polish the water
and improve clarity.
Ultraviolet
Light (Step 2 & 3 of Living Water)
With
the Ultraviolet process, water passes through a chamber where
it is exposed to Ultraviolet radiation. This type of treatment
is mainly used to kill bacteria. Very turbid water (containing
particulate matter, dirt, etc.) can reduce the effectiveness
of this type of treatment because the particles can prevent
the light from hitting the bacterium, allowing some to pass
through.
This
treatment can be effective against many bacterial contaminants
and some ultra violet systems have shown to be effective against
cryptosporidium. Other contaminants of health concern, (VOCs,
asbestos, Trihalomethanes and lead), are not affected by ultraviolet
treatment.
Ultraviolet
water systems are tested under NSF Standard 55.
Recent
articles in TIME, USA Today, Discover and the New York Timesamong
other publicationshave raised the level of alarm in
many people about the safety of their food and water sources.
Certainly, some concerns are well founded. Others are knee-jerk
reactions to scare tactic headlines. The truth is, in an increasingly
fast paced and shrinking world, new microbial caused diseases
can be introduced and spread more rapidly, requiring new defensive
techniques. One such technique involves renewed interest in
application of ultraviolet irradiation, or UV light, to water
disinfection.
While
considerable progress has been made in the implementation
of UV to disinfection technologies, still more development
is ongoing. The implications for the application of this technology
in drinking water are just beginning to be known. It appears
the cost of obtaining a total biological barrier with UV disinfection
may be less than a penny per thousand gallons of water treated.
If this proves true in the pilot and full-scale trials planned
and under way, UV disinfection of drinking water could become
the most significant advance in the protection of drinking
water sources since the introduction of chlorination.
Solid
Carbon Block Filtration (Step 4 of Living Water System)
Solid
Carbon Block Drinking Water Systems have combined the incredible
adsorption capability of carbon, with the ability of a solid
block of material to selectively strain out particles from
water that is forced through it. The density of the carbon
block determines how finely the water is cleaned. The better
brands of this type of filter have a three-part filter and
are designed to prevent any possibility of "bypass"
due to high water pressure.
The
block of carbon mechanically strains out dirt, sediment, rust,
algae, bacteria, microscopic worms, cryptosporidium and asbestos.
The compacted solid carbon block filter is designed to mechanically
filter particles down to sub micron size. By micro straining
the water, the consumer is assured that only the cleanest,
clearest water is delivered to the point-of-use.
Activated
carbon bonds to thousands of chemicals. In fact, carbon will
bond to most chemicals known! When water is forced through
the solid carbon block, it is forced to slow down and increase
the contact time with the carbon, allowing the carbon bonding
to take place to remove the chemical pollutants like toxins,
pesticides, THMs, chlorine, bad tastes, odors, etc.
Heavy
metals like lead do not bond to the carbon, but are strained
out by the pore size of the block. Basically, it's like trying
to put a basketball through a hole the size of a ping-pong
ball. Solid Carbon Block Filters are exceptionally uniform
and do not channel or bypass like conventional granular activated
carbon (GAC) filters are known to do. Because of the density
of the solid carbon block there is no room for bacteria to
grow, so this type of filter does not become an incubator
for bacteria, as GAC filters are known to be.
|